Siffa:
Ana iya amfani da shi don jujjuya filaye na silinda da mazugi, fuskokin ƙarewa da ramukan ciki, da kuma nau'ikan zaren awo da inch iri-iri.
1. Spindle: ta hanyar diamita na 52MM, daidai da daidaitattun ISO-C6 na duniya;fadada ikon sarrafa shaft
2. Tailstock Square: Wurin dokin yana da na'urar ƙwanƙwasa cam mai sauri, wanda ke da ingantaccen aiki.Akwai wata na'ura a cikin hannun rigar wutsiya don hana jujjuya bitar, wanda ke guje wa lalacewar taf ɗin rami na ciki na hannun wutsiya saboda jujjuya bitar ɗin da ke haifar da rashin aiki, kuma yana ba da kariya ta yadda yakamata.
3. Guide dogo surface: rungumi dabi'ar na lamba iko Super audio mita quenching da na gefe nika, wanda yana da abũbuwan amfãni daga high daidaici da kyau lalacewa juriya.
4. Akwatin gear na kai yana ɗaukar bearings na Harbin a cikin cikakkiyar saiti, kuma sandal ɗin ya ɗauki Harbin BEARING babban madaidaicin ƙwallon ƙwallon ƙwallon ƙafa don tabbatar da daidaito da kwanciyar hankali na sandar yayin jujjuyawar sauri, wanda ke haifar da larura masu mahimmanci don kera CNC. lathes.
5. Chuck: Karfe uku-jaw chuck shine daidaitaccen tsari na lathe, kuma ana iya zaɓar sauran chucks, wanda ke taimakawa wajen ƙarfafawa.
Abubuwan da ke da ka'idoji daban-daban suna da amfani ga sarrafawa da kuma samar da sauri.
| Samfura | C6 1/2 50C | |
| Ƙarfin sarrafawa | Matsakaicin diamita na lilo akan gado | 500 |
| Max.swing over giciye slide | 330 | |
| Matsakaicin diamita na juyawa a sirdiMafi girman diamita a sirdi | 660 | |
| Nisa ta tsakiya | 750,1000,1500 | |
| Nisa na gado | mm 360 | |
| Spindle | Ƙunƙarar leda | Φ52/80mm |
| Juyadda hanci | C6 | |
| Spindle taper | MT6 | |
| Matsakaicin saurin spindle(Matakai) | 40-1400(9 matakai) | |
| Ciyarwa | Zaren awo(Lamba) | 0.25-14 mm(iri 19) |
| Zaren incis(Lamba) | 2-40/inch | |
| Zaren zamanis(Lamba) | 0.25-3.5mπ(iri 11) | |
| Karusa | Ketare bugun jini Ketare bugun jini
| mm 222 |
| Kayan aiki hutu bugun jini Ƙananan kayan aiki hutu bugun jini
Ƙananan kayan aiki hutu bugun jini
Ƙananan kayan aiki hutu bugun jini
Ƙananan kayan aiki hutu bugun jini
Ƙananan kayan aiki hutu bugun jini
Ƙananan kayan aiki hutu bugun jini
Ƙananan kayan aiki hutu bugun jini
| 95mm ku | |
| girman sashi | 20 x 20mm² | |
| Tailstock | Taper na tailstock hannun riga | MT4 |
| Diamita na hannun rigar wutsiya | 65mm ku | |
| Buga hannun rigar wutsiya | mm 140 | |
| Babban motar | 5,5kw | |
| Girman kunshin:(L xWxH) | ||
| Nisa ta tsakiya mm 750 | 2220 x 1150 x 1590mm | |
| 1000mm | 2470 x 1150 x 1590mm | |
| 1500mm | 2970 x 1150 x 1590mm | |
| Nauyi:NW/GW(KG) | ||
| Nisa ta tsakiya mm 750 | 1500/2150 | |
| 1000mm | 1600/2250 | |
| 1500mm | 1750/2400 | |
Lokacin aikawa: Fabrairu-25-2023