BC6050 high quality karfe siffata inji
Ƙayyadaddun bayanai
| Samfura | BC6050 | |
| Matsakaicin tsayin yanke (mm) | 500 | |
| Max.Kewayon motsi a kwance na tebur | 525 | |
| Matsakaicin nisa tsakanin ragon kasa da tebur | 370 | |
| Matsakaicin tsayin motsin tebur a tsaye | 270 | |
| Girman tebur saman(L×W) | 440×360 | |
| Max. tsayin bugun bugun kai na kayan aiki | 120 | |
| Max.swivel kwana na kayan aiki | ± 60° | |
| Max.bangaran kayan aiki(W×T)(mm) | 20×30 | |
| Adadin rago a minti daya | 14-80 | |
| Kewayon abincin tebur | a kwance | 0.2-0.25 0.08-1.00 |
| A tsaye | ||
| Nisa na T-ramin don matsayi na tsakiya (mm) | 18 | |
| Ƙarfin babban motar | 3 | |
| NW/GW(kg) | 1650 | |
| Gabaɗaya girma(L×W×H)(mm) | 2160×1070×1194 | |
Bayani na BC6050
1. Tebur mai aiki na bullhead planer yana da tsarin motsi a kwance da sama da ƙasa;ana amfani da shi don tsara jirgin da aka karkata, ta yadda za a fadada iyakokin amfani.
2. Tsarin ciyarwa na mai tsarawa yana ɗaukar tsarin cam tare da matakan abinci 10.Hakanan yana da matukar dacewa don canza adadin wuka.
3. The bullhead planer sanye take da wani obalodi aminci inji a cikin yankan tsarin.Lokacin da yankan ya yi yawa saboda aikin rashin kulawa ko ƙarfin waje, kayan aikin yankan zai zamewa da kansa, kuma aikin na yau da kullun na na'urar yana da tabbacin ba tare da lalacewa ga sassan ba.
4. Tsakanin rago da jagorar gado, da kuma gear biyu tare da sauri da kuma babban filin jagorar zamiya, akwai mai mai mai mai da fanfun mai ke fitar da shi don zagayawa.
5. Jirgin saman bijimin yana sanye da ƙugiya da injin birki, don haka lokacin canza saurin gudu, fara kayan aikin injin da tsayawa, ba lallai ba ne don yanke wutar lantarki.Kayan ajiye motoci na birki na iya yin bugun ragon inertia lokacin da aka rabu da kama bai wuce 10 mm ba.
Kariyar aiki
1. Lokacin da aka ɗaga katako da saukar da shi, dole ne a fara sassauta kulle kulle da farko, kuma dole ne a ƙara ƙara lokacin aiki.
2. Ba a yarda a daidaita bugun rago a lokacin aikin na'urar na'ura ba.Lokacin daidaita bugun ragon, ba a yarda a yi amfani da hanyar taɓawa don sassauta ko ƙara ƙarfin daidaitawar.
3. Buga na ragon kada ya wuce iyakar da aka kayyade.Ba a yarda da babban gudun lokacin amfani da dogon bugun jini.
4. Lokacin da tebur ɗin aiki ya yi ƙarfi ko girgiza da hannu, kula da iyakar bugun bugun don hana dunƙule da kwaya daga raguwa ko lalata kayan aikin injin.
5. Lokacin lodawa da sauke vise, rike shi a hankali don guje wa cutar da wurin aiki.
6. Bayan aikin, dakatar da aikin aiki a kan matsakaicin matsayi na katako.
